" DISCLAIMER: The ILO does not take responsibility for content presented on this web portal that is presented in any language other than English, which is the language used for the initial production and peer-review of original content. Certain statistics have not been updated since the production of the 4th edition of the Encyclopaedia (1998)."

Saturday, 12 March 2011 17:00

Timber Transport

Written by
Rate this item
(16 votes)

Timber transport provides the link between the forest harvesting and the mill. This operation is of great economic importance: in the northern hemisphere it accounts for 40 to 60% of the total wood procurement cost at the mill (excluding stumpage), and in the tropics the proportion is even higher. The basic factors affecting timber transport include: the size of the operation; the geographic locations of the forest and the mill as well as the distance between them; the assortment of timber for which the mill is designed; and the kinds of transportation that are available and suitable. The main timber assortments are full trees with branches, delimbed tree lengths, long logs (typically 10 to 16m in length), shortwood (typically 2 to 6m logs), chips and hog fuel. Many mills can accept varied assortments of timber; some can accept only specific types—for example, shortwood by road. Transport can be by road, rail, ship, floating down a waterway or, depending on the geography and the distance, various combinations of these. Road transport by truck, however, has become the primary form of timber transportation.

In many cases timber transport, especially road transport, is an integrated part of the harvesting operation. Thus, any problem in timber transport may stop the entire harvesting operation. The time pressure can lead to a demand for overtime work and a tendency to cut corners that may compromise the workers’ safety.

Both forest harvesting and timber transport are often contracted out. Particularly when there are multiple contractors and subcontractors, there may be a question of who has the responsibility for protecting particular workers’ safety and health.

Timber Handling and Loading

When circumstances permit, timber may be loaded directly onto trucks at the stump, eliminating the need for a separate forest transport phase. When distances are short, forest transport equipment (e.g., an agricultural tractor with a trailer or semi-trailer) may convey the timber directly to the mill. Normally, however, the timber is first taken to the forest roadside landing for long-distance transport.

Manual loading is often practised in developing countries and in poorly capitalized operations. Small logs can be lifted and the large ones rolled with the help of ramps (see figure 1). Simple hand tools like hooks, levers, sappies, pulleys and so on may be used, and draught animals may be involved.

Figure 1.  Manual loading (with and without ramps).

FOR030F6

In most instances, however, loading is mechanized, usually with swing-boom, knuckle-boom or front-end loaders. Swing-boom and knuckle-boom loaders may be mounted on wheeled or tracked carriers or on trucks, and are usually equipped with grapples. Front-end loaders usually have forks or grapples and are mounted on crawler tractors or articulated four-wheel-drive tractors. In semi-mechanized loading, logs may be lifted or rolled up the loading skids by cables and different kinds of tractors and winches (see figure 2) . Semi-mechanized loading often requires workers to be on the ground attaching and releasing cables, guiding the load and so on, often using hooks, levers and other hand tools. In chipping operations, the chipper usually blows the chips directly into the truck, trailer or semi-trailer.

Figure 2.  Mechanized and semi-mechanized loading.

FOR030F7

Landing Operations

Landings are busy, noisy places where many different operations are conducted simultaneously. Depending on the harvesting system, these include loading and unloading, delimbing, debarking, bucking, sorting, storing and chipping. One or more large machines may be moving and operating at the same time while chain saws are in use close by. During and after rain, snow and frost, the logs may be very slippery and the ground may be very muddy and slick. The area may be littered with debris, and in dry weather it may be very dusty. Logs may be stored in unsecured piles several metres high. All this makes the landing one of the most dangerous working areas in the forestry industry.

Road Transport

Road transport of timber is carried by vehicles the size of which depends on the dimensions of the timber, road conditions and traffic regulations, and the availability of capital to purchase or lease the equipment. Two- or three-axle trucks with a carrying capacity of 5 to 6 tonnes are commonly used in tropical countries. In Scandinavia, for example, the typical logging truck is a 4-axle truck with a 3-axle trailer or vice versa—with a carrying capacity of 20 to 22 tonnes. On private roads in North America, one can encounter rigs with a total weight of 100 to 130 tonnes or more.

Water Transport

The use of waterways for timber transport has been declining as road transport has been increasing, but it still remains important in Canada, the United States, Finland and Russia in the northern hemisphere, in the watersheds of the Amazon, Paraguay and Parana rivers in Latin America, in many rivers and lakes in Western Africa and in most countries in Southeast Asia.

In mangrove and tidal forests, water transport usually starts directly from the stump; otherwise the logs have to be transported to the waterfront, usually by truck. Loose logs or bundles can be drifted downstream in rivers. They can be bound into rafts which can be towed or pushed in rivers, lakes and along coasts, or they may be loaded onto boats and barges of varying size. Ocean-going ships play a large role in the international timber trade.

Rail Transport

In North America and in the tropics, railway transport, like water transport, is giving way to road transport. However, it remains very important in countries like Canada, Finland, Russia and China, where there are good railway networks with suitable intermediate landing areas. In some large-scale operations, temporary narrow-gauge railways may be used. The timber may be carried in standard freight cars, or specially constructed timber-carrying cars may be used. In some terminals, large fixed cranes may be used for loading and unloading, but, as a rule, the loading methods described above are used.

Conclusion

Loading and unloading, which sometimes must be done several times as timber travels from the forest to where it will be used, is often a particularly hazardous operation in the timber industry. Even when fully mechanized, workers on foot and using hand tools may be involved and may be at risk. Some larger operators and contractors recognize this, maintain their equipment properly and provide their workers with personal protective equipment (PPE) such as shoes, gloves, helmets, glasses and noise protectors. Even then, trained and diligent supervisors are required, to ensure that safety concerns are not overlooked. Safety often becomes problematic in smaller operations and particularly in developing countries. (For an example see figure 3 , which shows workers without PPE loading logs in Nigeria.)

Figure 3.  Logging operations in Nigeria with unprotected workers.

FOR030F8

 

Back

Read 10976 times Last modified on Saturday, 27 August 2011 14:28

Contents

Preface
Part I. The Body
Part II. Health Care
Part III. Management & Policy
Part IV. Tools and Approaches
Part V. Psychosocial and Organizational Factors
Part VI. General Hazards
Part VII. The Environment
Part VIII. Accidents and Safety Management
Part IX. Chemicals
Part X. Industries Based on Biological Resources
Agriculture and Natural Resources Based Industries
Beverage Industry
Fishing
Food Industry
Forestry
Resources
Hunting
Livestock Rearing
Lumber
Paper and Pulp Industry
Part XI. Industries Based on Natural Resources
Part XII. Chemical Industries
Part XIII. Manufacturing Industries
Part XIV. Textile and Apparel Industries
Part XV. Transport Industries
Part XVI. Construction
Part XVII. Services and Trade
Part XVIII. Guides

Forestry Additional Resources

Click the Button below to view additional resources for this topic.

button

Forestry References

Apud, E, L Bostrand, I Mobbs, and B Strehlke. 1989. Guidelines on Ergonomic Study in Forestry. Geneva: ILO.

Apud, E and S Valdés. 1995. Ergonomics in Forestry—The Chilean Case. Geneva: ILO.

Banister, E, D Robinson, and D Trites. 1990. Ergonomics of Tree Planting. Canada–British Columbia Forest Resources Development Agreement, FRDA Report 127. Victoria, BC: FRDA.

Brown, GW. 1985. Forestry and Water Quality. Corvallis, OR: Oregon State University (OSU) Book Stores Inc.

Chen, KT. 1990. Logging Accidents—An Emerging Problem. Sarawak, Malaysia: Occupational Health Unit, Medical Department.

Dummel, K and H Branz. 1986. “Holzernteverfahren,” Schriften Reihefdes Bundesministers für Ernätrung, Handwirtschaft und Forsten. Reihe A: Landwirtschafts verlag Münster-Hiltrup.

Durnin, JVGA and R Passmore. 1967. Energy, Work, Leisure. London: Heinemann.

Food and Agriculture Organization (FAO) of the United Nations. 1992. Introduction to Ergonomics in Forestry in Developing Countries. Forestry Paper 100. Rome:FAO.

—. 1995. Forestry—Statistics Today for Tomorrow. Rome: FAO.

—. 1996. FAO Model Code of Forest Harvesting Practice. Rome: FAO.

FAO/ECE/ILO. 1989. Impact of Mechanization of Forest Operations on the Soil. Proceedings of a seminar, Louvain-la-neuve, Belgium, 11–15 September. Geneva: FAO/ECE/ILO Joint Committee on Forest Technology, Management and Training.

—. 1991. The Use of Pesticides in Forestry. Proceedings of a seminar, Sparsholt, UK, 10–14 September 1990.

—. 1994. Soil, Tree, Machine Interactions, FORSITRISK. Proceedings of an interactive workshop and seminar, Feldafiraf, Germany, 4–8 July. Geneva: FAO/ECE/ILO Joint Committee on Forest Technology, Management and Training.

—. 1996a. Manual on Acute Forest Damage. UN/ECE/ FAO discussion papers ECE/TIM/DP/7, New York and Geneva: Joint FAO/ECE/ILO Committee on Forest Technology, Management and Training.

—. 1996b. Skills and Training in Forestry—Results of a Survey of ECE Member Countries. Geneva: FAO/ECE/ILO Joint Committee on Forest Technology, Management and Training.

FAO/ILO. 1980. Chainsaws in Tropical Forests. Forest Training Series No. 2. Rome: FAO.

Gellerstedt, S. 1993. Work and Health in Forest Work. Göteborg: Chalmers University of Technology.

Giguère, D, R Bélanger, J-M Gauthier, and C Larue. 1991. Étude préliminaire du travail de reboisement. Rapport IRSST B-026. Montreal: IRSST.

—. 1993. Ergonomics aspects of tree planting using multi-pot technology. Ergonomics 36(8):963-972.

Golsse, JM. 1994. Revised FERIC Ergonomic Checklist for Canadian Forest Machinery. Pointe Claire: Forest Engineering Research institute of Canada.

Haile, F. 1991. Women Fuelwood Carriers in Addis Ababa and the Peri-urban Forest. Research on women in fuelwood transport in Addis Ababa, Ethiopia ETH/88/MO1/IRDC and ETH/89/MO5/NOR. Project report. Geneva: ILO.

Harstela, P. 1990. Work postures and strain of workers in Nordic forest work: A selective review. Int J Ind Erg 5:219–226.

International Labour Organization (ILO). 1969. Safety and Health in Forestry Work. An ILO Code of Practice. Geneva: ILO.

—. 1988. Maximum Weights in Load Lifting and Carrying. Occupational Safety and Health Service, No. 59. Geneva: ILO.

—. 1991. Occupational Safety and Health in Forestry. Report II, Forestry and Wood Industries Committee, Second Session. Geneva: ILO.

—. 1997. Code of Practice on Safety and Health in Forest Work. MEFW/1997/3. Geneva: ILO.

—. 1998. Code of Practice on Safety and Health in Forest Work. Geneva: ILO.

International Standards Organization (ISO). 1986. Equipment for Working the Soil: ROPS—Laboratory Testing and Performance Specifications. ISO 3471-1. Geneva: ISO.

Jokulioma, H and H Tapola. 1993. Forest worker safety and health in Finland. Unasylva 4(175):57–63.

Juntunen, ML. 1993. Training of harvester operations in Finland. Presented in seminar on the use of multifunctional machinery and equipment in logging operations. Olenino Logging Enterprise, Tvor Region, Russian Federation 22–28 August.

—. 1995. Professional harvester operator: Basic knowledge and skills from training—Operating skills from working life? Presented in IUFRO XX World Congress, Tampre, Finland, 6–12 August.

Kanninen, K. 1986. The occurrence of occupational accidents in logging operations and the aims of preventive measures. In the proceedings of a seminar on occupational health and rehabilitation of forest workers, Kuopio, Finland, 3–7 June 1985. FAO/ECE/ILO Joint Committee on Forest Working Techniques and Training of Forest Workers.

Kastenholz, E. 1996. Sicheres Handeln bei der Holzernteuntersuchung von Einflüssen auf das Unfallgeschehen bei der Waldarbeit unter besonderer Berücksichtigung der Lohnform. Doctoral dissertation. Freiburg, Germany: University of Freiburg.

Kantola, M and P Harstela. 1988. Handbook on Appropriate Technology for Forestry Operations in Developing Counties, Part 2. Forestry Training Programme Publication 19. Helsinki: National Board of Vocational Education.

Kimmins, H. 1992. Balancing Act—Environmental Issues in Forestry. Vancouver, BC: University of British Columbia Press.

Lejhancova, M. 1968. Skin damage caused by mineral oils. Procovni Lekarstvi 20(4):164–168.

Lidén, E. 1995. Forest Machine Contractors in Swedish Industrial Forestry: Significance and Conditions during 1986–1993. Department of Operational Efficiency Report No. 195. Swedish University of Agricultural Science.

Ministry of Skills Development. 1989. Cutter-skidder Operator: Competency-based Training Standards. Ontario: Ministry of Skills Development.

Moos, H and B Kvitzau. 1988. Retraining of adult forest workers entering forestry from other occupation. In Proceedings of Seminar on the Employment of Contractors in Forestry, Loubières, France 26-30 September 1988. Loubiéres: FAO/ECE/ILO Joint Committee on Forest Work Techniques and Training of Forest Workers.

National Proficiency Test Council (NPTC) and Scottish Skill Testing Service (SSTS). 1992. Schedule of Chainsaw Standards. Warwickshire, UK: NPTC and SSTS.

—. 1993. Certificates of Competence in Chainsaw Operation. Warwickshire, United Kingdom: National Proficiency Tests Council and Scottish Skills Testing Service.

Patosaari, P. 1987. Chemicals in Forestry: Health Hazards and Protection. Report to the FAO/ECE/ILO Joint Committee on Forest Working Technique and Training of Forest Workers, Helsinki (mimeo).

Pellet. 1995. Rapport d’étude: L’ánalyse de l’áccident par la méthode de l’arbre des causes. Luzern: Schweizerische Unfallversicherungsanstalt (SUVA) (mimeo).

Powers, RF, DH Alban, RE Miller, AE Tiarks, CG Wells, PE Avers, RG Cline, RO Fitzgerald, and JNS Loftus. 1990.
Sustaining site productivity in North American forests: Problems and prospects. In Sustained Productivity of Forest Soils, edited by SP Gessed, DS Lacate, GF Weetman and RF Powers. Vancouver, BC: Faculty of Forestry Publication.

Robinson, DG, DG Trites, and EW Banister. 1993. Physiological effects of work stress and pesticides exposure in tree planting by British Columbian silviculture workers. Ergonomics 36(8):951–961.

Rodero, F. 1987. Nota sobre siniestralidad en incendios forestales. Madrid, Spain: Instituto Nacional para la Conservación de la Naturaleza.

Saarilahti, M and A Asghar. 1994. Study on winter planting of chir pine. Research paper 12, ILO project, Pakistan.
Skoupy, A and R Ulrich. 1994. Dispersal of chain lubrication oil in one-man chain-saws. Forsttechnische Information 11:121–123.

Skyberg, K, A Ronneberg, CC Christensen, CR Naess-Andersen, HE Refsum, and A Borgelsen. 1992. Lung function and radiographic signs of pulmonary fibrosis in oil exposed workers in a cable manufacturing company: A follow up study. Brit J Ind Med 49(5):309–315.

Slappendel, C, I Laird, I Kawachi, S Marshal, and C Cryer. 1993. Factors affecting work-related injury among forestry workers: A review. J Saf Res 24:19–32.

Smith, TJ. 1987. Occupational characteristics of tree-planting work. Sylviculture Magazine II(1):12–17.

Sozialversicherung der Bauern. 1990. Extracts from official Austrian statistics submitted to the ILO (unpublished).

Staudt, F. 1990. Ergonomics 1990. Proceedings P3.03 Ergonomics XIX World Congress IUFRO, Montreal, Canada, August 1990. The Netherlands: Department of Forestry, Section Forest Technique and Woodscience, Wageningen Agricultural University.

Stjernberg, EI. 1988. A Study of Manual Tree Planting Operations in Central and Eastern Canada. FERIC technical report TR-79. Montreal: Forest Engineering Research Institute of Canada.

Stolk, T. 1989. Gebruiker mee laten kiezen uit persoonlijke beschermingsmiddelen. Tuin & Landschap 18.

Strehlke, B. 1989. The study of forest accidents. In Guidelines on Ergonomic Study in Forestry, edited by E Apud. Geneva: ILO.

Trites, DG, DG Robinson, and EW Banister. 1993. Cardiovascular and muscular strain during a tree planting season among British Columbian silviculture workers. Ergonomics 36(8):935–949.

Udo, ES. 1987. Working Conditions and Accidents in Nigerian Logging and Sawmilling Industries. Report for the ILO (unpublished).

Wettman, O. 1992. Securité au travail dans l’exploitation forestière en Suisse. In FAO/ECE/ILO Proceedings of Seminar on the Future of the Forestry Workforce, edited by FAO/ECE/ILO. Corvallis, OR: Oregon State University Press.